Home Family Home-Decor Why a Router Table is perfect for Wood Milling Works?

Why a Router Table is perfect for Wood Milling Works?

0
Why a Router Table is perfect for Wood Milling Works?

Router Table is a kind of saw for milling the most important processing types of wood. Whether using a router table- with a little basic knowledge, the work steps are easy.

For more precision: Milling wood instead of drilling

How Planing or Drill Milling is also a form of metal-cutting woodworking. For example, if a wooden board is to be provided with a hole of a certain diameter, a drill and a jigsaw are the obvious choice at first glance. However, these and similar tasks can be done more precisely with a router table. Wood milling offers clear advantages over drilling and sawing:

  • High cutting accuracy
  • Fine details and inner contours
  • Increased flexibility through freehand guidance

Milling is ideal for fine woodwork, detailed work as well as ornamentation and engraving. Milling work allows precise cuts in the workpiece, for example with a groove in the plywood or a bevel on the window sill. Numerous shapes on milling heads also enable a wide variety of milling work, such as patterns, letters or even pictures.

When milling, soft wood is handled differently than hard types of wood. For example, workpieces made of pine, spruce or larches are clamped more carefully so that no impressions are made in the material. On the other hand, the feed and the speed of rotation of the milling head are selected appropriately for the wood: If the feed is too high or the speed of rotation is too low, the milling cutter can get stuck in the material and cause damage.

With hard wood such as oak, cherry or walnut, the stress on the milling head is higher. Therefore only really sharp edges should be used be used to branding or tearing at the cut edges avoid.

Benefits of working on a router table

  • Easy construction
  • Milling is always in the opposite direction (higher security)
  • Grooving cutter most widely used
  • Variety of milling heads: font milling cutters, chamfer milling cutters, countersinks, and much more

Do I need a Router Table? Yes of course you do! The router is best suited for processing flat workpieces and can be used for fine and rough work. The angle grinder is usually used as a carving or grinding tool. With the fine boring grinder, very filigree, fine milling work is possible, but it quickly reaches its limits with large projects.

If the router is running at the desired speed, it can be slowly lowered onto the wood. Now slide it quickly and evenly along the rip fence to get a nice routing pattern. In the case of longer workpieces, the milling should be carried out in several steps, as the milling head can otherwise overheat and break or even damage the wood.

Conclusion

The milling of wood workpieces is a processing technique at which created different forms can be. Which power tool is best suited for this depends in principle on the intended work. Especially versatile is the router. Thanks to various milling heads and setting options, different materials can be machined precisely. Whether a circular cutout, groove or decorative heart shape: With a router, many milling jobs can be done without any problems.

If you want to know about what a jigsaw used for then click here.

LEAVE A REPLY

Please enter your comment!
Please enter your name here